Change gear count on A-Chassis

Help and Feedback Scripting Support
1

I can’t figure out how to change the gear count on A-Chassis as it’s by default 7, but I only want 6. Where could I change this in the scripts provided?

2

Go to A-Chassis > A-Chassis Tune
In A-Chassis Tune you have to scroll down to line 188
This is defeault:

Tune.Ratios			= {			 --		SPEED [SPS]	 = (Wheel diameter(studs) * math.pi * RPM) / (60 * Gear Ratio * Final Drive * Multiplier)
		--[[ R ]]		18.641		,--		WHEEL TORQUE = Engine Torque * Gear Ratio * Final Drive * Multiplier
		--[[ N ]]		0			,
		--[[ 1 ]]		16.641		,
		--[[ 2 ]]		12.342		,
		--[[ 3 ]]		9.812		,
		--[[ 4 ]]		7.765		,
		--[[ 5 ]]		6.272		,
		--[[ 6 ]]		5.045		,
		--[[ 7 ]]		4.572		,
		--[[ 8 ]]		4.072		
	}

If you want 6 gears just delete line with 8th and 7th gear, like that:

Tune.Ratios			= {			 --		SPEED [SPS]	 = (Wheel diameter(studs) * math.pi * RPM) / (60 * Gear Ratio * Final Drive * Multiplier)
		--[[ R ]]		18.641		,--		WHEEL TORQUE = Engine Torque * Gear Ratio * Final Drive * Multiplier
		--[[ N ]]		0			,
		--[[ 1 ]]		16.641		,
		--[[ 2 ]]		12.342		,
		--[[ 3 ]]		9.812		,
		--[[ 4 ]]		7.765		,
		--[[ 5 ]]		6.272		,
		--[[ 6 ]]		5.045		
	}
1 Like