DentiStar Dentistry • Community Handbook

Bulletin Board
#1

banner
banner1500×500 90.5 KB

Our Community

Hoshikage irasshaimase! Step into serenity with DentiStar - where smiles radiate like stars, DentiStar beckons you to a delightful twilight island, a warm dental oasis shimmering gently under the night sky. If you seek care that will make your smile radiate, you’ve found your destination. From refreshing cleanings to seamless brace fittings, our stellar team is committed to ensuring your visit is smooth, comfortable, and enjoyable. With a touch of magic, your teeth will gleam brighter than ever.

:link: Roblox Community

Beauty Resides, Smiles Bloom.

info_banner
info_banner1500×500 94.1 KB

Contents

Rank Structure

At DentiStar, we categorize our ranks into four distinct tiers: Low Ranks, Management Ranks, Corporates, and Super Ranks. Below, you will find a detailed list of our roles to assist you in reaching out to an available staff member.

Super Ranks

  • Owner
  • Co-Owner
  • President
  • Vice President
  • Board of Directors

Department Ranks

  • Communications Coordinator
  • Staffing Coordinator

High Ranks

  • Board of Trustees
  • Corporate Director
  • Corporate Board
  • Corporate Assistant
  • Corporate Intern

Management Ranks

  • General Manager
  • Assistant Manager
  • Supervisor
  • Dentistry Assistant

Low Ranks

  • Oral Specialist
  • Orthodontist
  • Dental Technician
  • Hygiene Specialist
  • Receptionist
  • Trainee
Protocols
  • Hygiene Specialist: Cleanings, Check-Ups, Sealants.
  • Dental Technician: Whitenings, Fillings, Bondings.
  • Orthodontist: Crowns, Retainers, Retainer Check-Up, Dentures, Veneers, Braces, Braces Tightening, Braces Check-Up, Braces Removal, Spacers.
  • Oral Surgeon: Extraction, Dental Implant, Wisdom Tooth Removal, Root.

Cleaning

  1. Hand scale the client’s teeth.
  2. Use a machine scaler to scale the client’s teeth.
  3. Ask them what flavor of toothpaste they’d like, the options are mint, bubblegum or strawberry.
  4. Gently begin brushing their teeth with the gritty toothpaste.
  5. Rinse and suction.
  6. Apply fluoride treatment to the surface of their teeth.
  7. Inform them not to eat for the next hour to prevent the fluoride from rubbing off.

Check-Up

  1. Ask the client if they have been experiencing any issues with their teeth recently.
  2. Ask them if they brush at least 2 times a day, if they say no, recommend to them that they do.
  3. Ask them if they have any questions before you proceed with the appointment.
  4. Ask them to open their mouth so you can check their teeth.
  5. Check their mouth for cavities.
  6. Check their mouth for plaque and tartar.
  7. Take an X-ray of their teeth.

Sealant

  1. Ask them if they have any questions before you proceed with the appointment.
  2. Thoroughly rinse and suction the tooth.
  3. Apply etching solution to where the sealant will be placed.
  4. Use an air nozzle to ensure the tooth is dry.
  5. Prepare and apply the sealant.
  6. Ensure it’s positioned correctly.
  7. Cure the sealant with a curing light.

Whitening

  1. Ask them if they have any questions before you proceed with the appointment.
  2. Place retractors into the client’s mouth.
  3. Apply protective gel over the client’s gums.
  4. Apply the whitening gel onto the surfaces of the teeth.
  5. Activate the gel using an activating light.
  6. Allow it to sit before rinsing and suctioning.
  7. Remove the protective gel from the gums.
  8. Inform your client that their teeth may be sensitive for some time after the treatment, and to not eat anything for the next hour to prevent staining.

Filling

  1. Ask them if they have any questions before you proceed with the appointment.
  2. Numb the area around where the filling will be taking place.
  3. Drill the cavity, ensuring that all infected or broken parts of the tooth are removed.
  4. Suction.
  5. Ask the client if they would like a gold, ceramic, or silver filling.
  6. Apply the filling.
  7. Set it using a setting light.
  8. Inform your client that their teeth may be sensitive for some time after the filling, and to be careful when disturbing the tooth.

Bonding

  1. Ask them if they have any questions before you proceed with the appointment.
  2. Color-match a composite resin to the color of your client’s teeth.
  3. Gently abrase the surfaces of the teeth that are being bonded.
  4. Apply the resin to the surfaces of the teeth that are being bonded.
  5. Cure the resin using a curing light.
  6. Polish the surfaces of the teeth until the client is happy with the look.

Crown

  1. Ask them if they have any questions before you proceed with the appointment.
  2. Numb the gum surrounding the tooth.
  3. Isolate the tooth.
  4. Drill the tooth.
  5. Rinse and suction thoroughly.
  6. Place the crown onto the tooth.
  7. Ensure it is secure and set into place correctly.

Retainers

  1. Ask them if they have any questions before you proceed with the appointment.
  2. Take impressions of their teeth.
  3. Apply plaster into the impressions, this will create an accurate replica of their teeth, and wait for it to set.
  4. Once set, place the plastic over the plaster replica, and wait for the plastic to cool.
  5. Once cooled, abrase the edges of the retainer to ensure it will fit into the client’s mouth.
  6. Place it into their mouth ensuring that they can place it in and remove it, and it fits well.

Retainer Check-Up

  1. Ask them if they have any questions before you proceed with the appointment.
  2. Ask them if they have been having any issues with their retainers so far.
  3. Ask them to place their retainers into their mouth.
  4. Ensure that they still fit correctly.
  5. Check that the retainers are not damaged.
  6. Ask the client to remove their retainers.
  7. Clean their retainers and hand them back to the client.

Dentures

  1. Ask them if they have any questions before you proceed with the appointment.
  2. Inspect the client’s mouth.
  3. Take the client to the x-ray room and take an x-ray of their teeth.
  4. Take impressions of their teeth.
  5. Color-match the denture shade to the client’s teeth.
  6. Secure the dentures in the client’s mouth and ensure they are happy with the look and they are comfortable.

Veneers

  1. Ask them if they have any questions before you proceed with the appointment.
  2. Color-match the veneers to the color of your client’s teeth.
  3. Gently abrase the surfaces of the enamel on the teeth that you are putting the veneers on.
  4. Apply the veneers to the surfaces of the teeth.
  5. Bond the veneers using a bonding light.
  6. Polish the surfaces of the teeth until the client is happy with the look.

Braces

  1. Ask them if they have any questions before you proceed with the appointment.
  2. Take x-rays of their teeth.
  3. Ask them what color bands they would like: red, orange, yellow, green, navy, teal, magenta, violet, white, black, silver or clear.
  4. Place retractors in their mouth.
  5. Rinse and suction their teeth thoroughly.
  6. Apply etching solution to the surfaces of their teeth.
  7. Suction the solution off the surfaces of their teeth.
  8. Apply a small ‘drop’ of glue on the center of each tooth.
  9. Apply the brackets, and ensure they’re in the correct position.
  10. Set them into position using a setting light.
  11. Retrieve the smallest wire, and place it through the back brackets.
  12. Secure it with the bands they chose.
  13. Trim the ends of the wire before asking them if there are any sharp bits.

Braces Tightening

  1. Ask them if they have any questions before you proceed with the appointment.
  2. Ask them if they’ve been having any issues with their braces so far.
  3. Ask them what color bands they would like: red, orange, yellow, green, navy, teal, magenta, violet, white, black, silver or clear.
  4. Place retractors in the client’s mouth.
  5. Remove the old bands from the brackets.
  6. Remove the wire.
  7. Get a thicker wire and place it back in the back brackets, and then onto the main ones.
  8. Secure the brackets with the new bands.
  9. Trim the ends of the wire before asking them if there are any sharp bits.

Braces Check-Up

  1. Ask them if they have any questions before you proceed with the appointment.
  2. Ask them if they’ve been having any issues with their braces so far.
  3. Ask them if they have any questions about their braces.
  4. Ask them to open their mouth and examine their braces.
  5. Take x-rays of their teeth and compare them to their old ones.
  6. Estimate when they’ll be able to get their braces off.

Braces Removal

  1. Ask them if they have any questions before you proceed with the appointment.
  2. Inspect their teeth.
  3. Loosen and remove the brackets using pliers.
  4. Remove the glue on each tooth, using a polisher.
  5. Rinse and suction.
  6. Take impressions of their teeth.
  7. Take them to the x-ray room and take x-rays of their teeth.

Spacers

  1. Ask them if they have any questions before you proceed with the appointment.
  2. Prepare the spacers.
  3. Place the spacers between the molars.
  4. Ensure that the spacers are in the correct position.

Extraction

  1. Ask them if they have any questions before you proceed with the appointment.
  2. Rinse and suction.
  3. Numb the gum around the tooth/teeth that will be extracted.
  4. Gently poke the gum, asking if they can feel it or not.
  5. Gently loosen the tooth, before removing it.
  6. Suction.
  7. Place a cotton wool roll into the space where the tooth was.
  8. Notify your client to rinse their mouth after eating, and that it will be sore for a few days whilst it heals.

Dental Implant

  1. Ask them if they have any questions before you proceed with the appointment.
  2. Rinse and suction.
  3. Put them to sleep using general anesthetic.
  4. Drill a small hole where the implant will be placed.
  5. Secure the implant.
  6. Rinse and suction before waking them up.
  7. Ensure they are happy with the implants.

Wisdom Tooth Removal

  1. Ask them if they have any questions before you proceed with the appointment.
  2. Rinse and suction.
  3. Put them to sleep using general anesthetic.
  4. Loosen the wisdom teeth, before extracting them.
  5. Suction.
  6. Place cotton wool rolls into the spaces where the wisdom teeth were.
  7. Wake them up, before securing them an ice pack.

Root Canal

  1. Numb their tooth.
  2. Isolate the tooth using a dam.
  3. Begin to drill the tooth.
  4. Rinse and suction.
  5. Seal the tooth using a root canal filling.
Management Promotions

As an Oral Surgeon on the Low Rank team, you are eligible for a promotion to Dentistry Assistant and the chance to join the Management Team. However, certain requirements must be fulfilled before you can be considered for this advancement.

  • Must be in the Communications server.
  • Must have a verified account with 2FA (Two Factor Authentication) on both Discord and Roblox.
  • Must have been an Team Leader for at least a week.
  • Must uphold a professional demeanor within our Facilities, and show daily activity.

If you fulfill ALL the requirements outlined above, your chances of receiving a recommendation through our Staffing System and gaining recognition from our Corporate Team are significantly enhanced. Please note that our Staffing Team releases Management Applications approximately every 2 months, based on demand.

Ban Appeals

If you feel that your ban by a Server Moderator was unjust, you have the right to appeal, provided your Ban Notice does not indicate otherwise. We encourage you to complete the form linked below to the best of your ability. A decision regarding your potential unbanning will be made at the discretion of our Corporate and Staffing Teams. Please keep the following in mind:

  • This is checked every Friday or Monday.
  • If you are unbanned, you will be directed messaged by a Staffing Team member with a link to the server and further information.
  • If you don’t receive any DM, you haven’t been unbanned.
  • All normal bans expire after 3 months.

:link: Ban Appeal Form

Affiliation Requirements

To affiliate with DentiStar, you must fulfill the following requirements, ensuring that our standards align while helping your establishment gain the visibility and benefits that a mutual partnership can offer.

  • 60+ Discord non-botted members.
  • 100+ ROBLOX non-botted members.
  • Be able to provide 2 representatives who maintain activity and keep up to date with our requests.
  • Have a professional, safe-for-work and easy to navigate server.
  • Maintain activity within your establishment’s communications server.

If you fulfill these requirements, please open a ticket under the “Communications Inquiries” tag. Exceptions may be granted as necessary.

Handbook Conclusion

Thank you for taking the time to explore DentiStar as a welcoming and diverse community. If you have any further questions, please don’t hesitate to join our Communications server and open a ticket under the “General Inquiries” tag!

Sincerely,
DentiStar Ownership Team

3 Likes