Hello! You may have seen some of these renders with Cloth Simulations
Note I don’t take Credit from these 3 Renders
So today I will be showing you all how to make this type of clothing!
1. Duplicate the Torso to be made of cloth with
2. Right-click on the Torso you duplicated earlier from Step 1 and set the Origin to Geometry
3. Scale up the Torso that you have Duplicated
By Pressing S you will be able to scale it.
4. Go To Edit Mode and Press B and select the Torso make sure the 3rd Box Icon in Edit Mode is selected
5. After that, it should start Looking like this
** Just a Little Reminder, Make sure that all the torso must have holes for the head and the arms.
6. Press on B and Select the half of the torso make sure your in Wireless Mode
7. Press on X and Click Edges
**
8. Go onto the Modifier Section and Click on Mirror
9.It should look like this again, But if you go back to Edit Mode you can just Move the Other Side
10. After that, You’ll need to click on Apply on the Mirror Modifier and it should say something like this
11. Now for my favorite Part, Is the Sculpting. It will only take around a few minutes to play around with the Simulation
After That, It should Start Look Like this
Renders from @.hywwitGFX @.nanda000rbx @.MoonLB_