Polish Railway Simulator: rules and game guide

Rules and game guide for PRS (Polish Railway Simulator) by NT18T (Natano2018’s Trains)


Table of contents:

Rules
  1. Derailing trains on purpose (using derailers) and by accident is forbidden.
  2. No going over scheduled speed and line speed (allowed difference is 5 km/h).
  3. Use common sense.
  4. No abusing game bugs for own benefit.
  5. No abusing radio-stop system.
  6. You need to pass a training in order to drive trains.
  7. Listen to higher ranks.
  8. As a passenger try to stick to paths, platforms and sidewalks.
  9. Abide Roblox ToS.
  10. More rules can be added without notifying players.

Rules and handbook for signallers can be found here.

Game guide

A basic guide to PRS

Playing the game
Signals
Sound signals
  • Rp1 Baczność

Light signals
Semafory półsamoczynne

Semafory półsamoczynne are semaphores that are semi-automatic because they change to red light after a train goes by the semaphore. They might have from 3 to 5 lights.

Signals displayed by semafory półsamoczynne
  • S1 Stój - a steady red light. It does not allow passing that semaphore.
  • S2 - a steady green light. It allows passing that semaphore with maximum allowed speed and indicates, that the next semaphore is showing S2 too.
  • S3 - a blinking green light. It allows passing that semaphore with maximum allowed speed and indicates, that the next semaphore is showing a signal that allows the speed of 100 km/h.
  • S4 - a blinking orange light. It allows passing that semaphore with maximum allowed speed and indicates, that the next semaphore is showing a signal that allows the speed of 40 or 60 km/h.
  • S5 - a steady orange light. It allows passing that semaphore with maximum allowed speed and indicates, that the next semaphore is showing S1 Stój.
  • S10 - a steady green light and a steady orange light below. It allows passing that semaphore with the speed of 40 km/h and indicates, that the next semaphore is showing a signal that allows maximum allowed speed.
  • S11 - a blinking green light and a steady orange light below. It allows passing that semaphore with the speed of 40 km/h and indicates, that the next semaphore is showing a signal that allows the speed of 100 km/h.
  • S12 - a blinking orange light and a steady orange light below. It allows passing that semaphore with the speed of 40 km/h and indicates, that the next semaphore is showing a signal that allows the speed of 40 or 60 km/h.
  • S13 - a steady orange light and a steady orange light below. It allows passing that semaphore with the speed of 40 km/h and indicates, that the next semaphore is showing S1 Stój.
  • Sz - a steady red light and a blinking white light below. It’s used during failures of railway traffic control devices. It allows the speed of 40 km/h. After passing the signal the driver should control the speed so that he can stop the train in case of seeing any obstacle on the track.
  • Ms2 - (note that not all Smeafory półsamoczynne can display Ms2) a steady white light. It allows


Semafor półsamoczynny with 3 lights.

image
Semafor półsamoczynny with 4 lights.


Semafor półsamoczynny with 5 lights.

Tarcze ostrzegawcze

Tarcze ostrzegawcze are semaphores that inform the driver about what signal is displayed on the next semaphore. They might display 4 signals: Os1, Os2, Os3 and Os4.

Signals displayed by tarcze ostrzegawcze

There are 4 possible signals displayed by tarcze ostrzegawcze:

  • Os1 - a steady orange light. If shown, then the signal displayed on a semaphore will be S1 Stój.
  • Os2 - a steady green light. If shown, then the signal displayed on a semaphore will allow the maximum allowed speed.
  • Os3 - a blinking green light. If shown, then the signal displayed on a semaphore will allow the speed of 100 km/h.
  • Os4 - a blinking orange light. If shown, then the signal displayed on a semaphore will allow the speed of 40 or 60 km/h.


Tarcza ostrzegawcza.

Tarcze manewrowe

Tarcze manewrowe are semaphores that have 2 lights. They are to be skipped by trains that are not currently maneuvering. They might display 2 signals:

  • Ms1 - a steady blue light. It does not allow maneuvering behind the semaphore. Allowed speed behind tarcza manewrowa showing Ms1 is 0 km/h.
  • Ms2 - a steady white light. It allows maneuvering behind the semaphore. Allowed speed behind tarcza manewrowa showing Ms2 is 25 or 40 km/h.


Tarcza manewrowa.

Tarcze zaporowe

Tarcze zaporowe are semaphores that can display only a steady red light. They do not allow passing behind that semaphore and are typically used near ends of tracks and such.


Tarcza zaporowa.

Gamepass liveries

Gamepass liveries can be bought in the game’s store on Roblox.
Currently these include:

After buying the specific gamepass you will be able to spawn that wagon(s).


Will be updated over time. Written by @MateuszW2008