Ss6 lifts car model

Help and Feedback Scripting Support
#1

The car on the ss6 chassis lifts up and I want to lower it.

  1. What is the issue? Include screenshots / videos if possible!
    The car lifts up.
    image
  2. What solutions have you tried so far? Did you look for solutions on the Developer Hub?

So far I’ve tried lowering the car model but when I run it sinks below the ground but the chassis is still drivable.
image
image

I made it by using a free model car then putting my own wheel and body meshes on it. I don’t know if this helps but I used Blender to make both the car and the wheels.

#2

Try putting a qPerfection weld into the car model. If it already has one or that does not work then try selecting the car minus the wheels and moving it up because the car frame is kind of inside the wheels.

#3

SS6 is an old chassis system. Are you sure you can’t use A-Chassis?

Additionally, with these chassis systems:

  • You need to make sure that the entire contents of the body are not CanCollide, otherwise they will impact the wheels.
  • You need to make sure that the entire contents of the body are Anchored so the chassis’ weld script will do its job.
  • You may need to fine-tune suspension settings within the chassis system itself.