Best way to get the angle between two vectors?

Help and Feedback Scripting Support
#1

For my NPC system, I’m looking to have the NPC rotate their head to look at you (obviously with rotation limits). The desired effect will look something like this:

https://i.gyazo.com/2c8202dfbc17b3cb69adf625cc064d21.mp4

To rotate the head, I use tween service. In the example above, I did:

CFrame = head.CFrame * CFrame.fromEulerAnglesXYZ(0,math.rad(45))

My question is, what’s the easiest way to get the angle required for the NPC to look at the player?

CFrame = head.CFrame * CFrame.fromEulerAnglesXYZ(0,math.rad(θ))

image
image833×768 262 KB

I could use trigonometry, I’m just curious to know if there’s an easier way to obtain the desired angle?

12 Likes
Get angle between two vectors
How to prevent rotating player from "teleporting"
How do you get the smallest degree between 2 parts?
Character keeps glitching when on ramp
#2

This should work.

CFrame.new ( Vector3 pos, Vector3 lookAt )
head.CFrame = CFrame.new(head.Position,Vector3.new(playerHumanoidRootPart.Position.x,head.Position.y,playerHumanoidRootPart.Position.z))

22 Likes
How can I make a compass gui?(Closed)
#4

SebastianAurum provided the best way of solving OPs actual problem, but in case someone in the future really does need to find such an angle, here’s how you can do that:

First of all, you can’t find an angle between two points. It just doesn’t make any sense, because an angle needs at least three points to be properly defined: a point each on the legs of the angle, and one for the point/knee of the angle. In OPs case, it looks like they’re really asking for the angle between two vectors, which does make sense (the vector from NPCs head to players head, and vector of direction of NPCs head).

The angle between two vectors a and b is

math.acos( a:Dot(b)/(a.Magnitude * b.Magnitude) )

We often deal with the special case where both vectors are unit vectors (i.e. their magnitude is 1), in which case this slightly simpler expression that you might see being used elsewhere works as well:

math.acos( a:Dot(b) )

This technique only returns angles in the interval [0; pi] because two vectors can never point more away from each other than directly away from each other, which can always be achieved by a rotation of pi radians = 180 degrees. This means the angle you get in this way has no direction (it’s never negative), so if you need that direction you’ll need a different technique:

First of all, this method works best with a CFrame and a vector (could also use 3 vectors), and then gets the angle between the CFrame’s lookVector and the given vector. Because the CFrame has an upVector as well, we can work with the direction:

local projectedVector = cframe:VectorToObjectSpace(vector) * Vector3.new(1, 0, 1)
local angle = math.atan2(projectedVector.Z, projectedVector.X)

This works by projecting the vector onto a 2D plane perpendicular to the upVector of the cframe, and converted to a representation that is in relation to the cframe. It then uses atan2 to calculate the angle between the lookVector of the cframe and the vector in that plane.

EDIT: :rotating_light: Please see the following comments for a bit of clarification :rotating_light:

206 Likes
How can I use trigonometry to find this angle?
Angle between two Vector2s
How do I find an angle between 2 rays?
How can I drive my car to Vector3 Position?
How to get angle of elevation relative to the world?
Angle calculations
What to learn to make Radar Lock
Angles and getting them
How do I get the angle between two parts?
Work out impact angle for armour system
Camera Rotation Limit [SOLVED]
Work out impact angle for armour system
#5

Nice explanation, thanks for the clarification.

7 Likes
#6

You are a lifesaver <3. This is going to be perfect for the tank I am creating.

9 Likes
#7

Found an error in the OP post

This should be using PointToObjectSpace instead, as this transforms a vector into object space.
VectorToObjectSpace doesn’t do what the name implies, the whole documentation for these methods is really ugly.

The fix is:

local projectedVector = script.Parent.Base.CFrame:PointToObjectSpace(pos) * Vector3.new(1, 0, 1)
14 Likes
#8

Thanks, that’s a great clarification! In the case where vector is a point in 3D space, @AbstractAlex 's response makes more sense than what I wrote. If vector is the difference between a point in 3D space and the position component of a CFrame, then it is the direction to the point from the CFrame.

VectorToObjectSpace and VectorToWorldSpace mostly make sense when working with vectors that are in the CFrame’s local space. In the former example that is not the case, in the latter it is.

I’ve updated my comment to make sure people see this :slight_smile: If there are any other corrections or clarifications please let me know, at > 100 :heart:s it’s probably worth it to make the comment as good as possible

5 Likes
#9

Sorry for bumping this thread but how to get a Rotation output (Vector3) from 2 vector3 values?

#10

I still can’t find a solution as every time I search, the thread is about getting an angle (number) between 2 Vector3s instead of a rotation (Vector3).

How can I find the angles between two parts like in this diagram?
#11

You should start a new thread since that is a different problem

Although to answer your question, you can use CFrame.lookAt to get a CFrame that looks directly at one of the Vector3s while being positioned at the other
Then you can use the .LookVector property to get the vector direction

#12

This post helped me so much knowing how to script getting the angle of the ground for a slide script i am making. Thank you.